HCPL-M453光电耦合器是HP-AGILENT-AVAGO公司的产品
Small Outline, 5 Lead, High Speed Optocouplers

替换: 可直接替换小日本东芝公司的光耦
TLP114A

描述

This small outline high CMR, high speed, diode-transistor optocoupler is a single channel device in a five lead miniature footprint. Its SO-5 JEDEC registered (MO-155) package outline does not require "through holes" in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.

It uses an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance.

The HCPL-M453 is an HCPL-M452 with increased common mode transient immunity at 15000 V/ms minimum at VCM = 1500 V guaranteed.

特性
Surface Mountable
Very Small, Low Profile JEDEC Registered Package Outline
Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes
Very High Common Mode Transient Immunity: 15000 V/us at VCM = 1500V Guaranteed
High Speed: 1 Mb/s
TTL Compatible
Guaranteed AC and DC Performance over Temperature: 0 degrees C to 70 degrees C
Open Collector Output
Recognized Under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute
Lead Free Option "-000E"

应用
Line Receivers - High common mode transient immunity (>1000 V/ms) and low input-output capacitance (0.6 pF)
High Speed Logic Ground Isolation - TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL
Replace Slow Phototransistor Optocouplers
Replace Pulse Transformers - Save board space and weight
Analog Signal Ground Isolation - Integrated photon detector provides improved linearity over phototransistor type

资料下载
http://pdf.18ic.com/datasheet/hp/agilent/avago/HCPL-M453.pdf